2711P-B12C4A7

FAQ:

Question: How to change the Decimal Separator for Numeric Formats?

Answer: You can change the decimal separator used in numerics for the current language. The default decimal separator is a period.1. Select Terminal Settings>Time/Date/Regional Settings>Regional Settings>Numeric Format. The field shows the default decimal separator. The field will accept a separator up to three characters.2. Enter up to three characters for the new separator.3. Click OK.

Question: How to replace a 2711P-B12C4A7 communication module?

Answer: 1. Disconnect power from the terminal.2. Disconnect the communication cables from the module.3. Loosen the three screws that secure the communication module to the terminal.4. Carefully lift the communication module away from the terminal and set aside.5. Install the new communication module.

Question: What steps need to be connectted the terminal 2711P-B12C4A7 to AC power?

Answer: 1. Verify that the terminal is not connected to a power source.2. Secure the AC power wires to the terminal block.Follow the markings on terminal blocks and terminal for proper connections.3. Secure the protective earth/ground wire to the marked position of the power input terminal block.4. On the 700 to 1500 devices, also secure the functional earth/ground wire to the functional earth terminal screw on the back of the display to ground bus.5. Apply AC power to the terminal.

Question: What tools are required for 2711P-B12C4A7 installation?

Answer: